Information
This mixed-media network module has two full/half duplex, auto-sensing 10/100 Ethernet port and 2 WAN Interface Card (WIC) expansion slots, supporting all current WICs and VWICs. The 10/100 Ethernet connections are via RJ-45 connectors.
Specifications
MTBF
569302 Hour
Humidity
5% to 95% Relative Humidity
Dimensions
1.6" Height x 7.1" Width x 7.2" Depth
Temperature
- 32°F (0°C) to 104°F (40°C) Operating
- -13°F (-25°C) to 158°F (70°C) Non-operating
Product Name
Network Module
Product Type
Network Module
Compatibility
- 3745 - 12.2(8)T
- 3725 - 12.2(8)T
- 3660 series - 12.0(7)XK
- 3640 - 12.0(7)XK
- 3620 - 12.0(7)XK
- 2691 - 12.2(8)T1
- 2650 - Not Available
- 2600XM Series - Not Available
- 2600 series - Not Available
- 1720 - Not Available
- 1600 series - Not Available Network interfaces: - Compatible with all existing network modules and WICs supported by Cisco 2600/3600 family Not supported:
- WIC36-1B-S/T
- WIC36-1B-U
- WIC-1B-S/T-LL
- WIC-1ENET
Expansion Slots
2 x WIC/VWIC
Interfaces/Ports
2 x 10/100Base-TX LAN
Application/Usage
Data Networking
Power Consumption
15 W Maximum @
Status Indicators
- Ethernet 10/100 Speed Indication
- Link and full Duplex LEDS
Connectivity Media
Twisted Pair 10/100Base-TX
Data Transfer Rate
- 10 Mbps Ethernet Half/Full-duplex
- 100 Mbps Fast Ethernet Half/Full-duplex
Interfaces Details
2 x RJ-45 10/100Base-TX Auto-sensing LAN
System Requirements
- The minimum level of IOS is IOS 12.0(7)XK or 12.1(1)T
Weight (Approximate)
2.50 lb Maximum
Additional Information
- LAN-to-LAN Routing
- VPN & Firewall Solutions
- DSL Access
- Dialup Remote Access
- ISDN Concentration
- Serial & Legacy Concentration The Maximum Number of NMs that can be utilized in each of the 2600/3600 families is as follows:
- 2691: 1
- 3620: 2
- 3640: 4
- 3660: 6
- 3725: 2
- 3745: 4 Protocols supported:
- Full Cisco IOS software as of 12.0(7)XK WIC Performance:
- Up to 8Mb/s per WIC (with just 1 WIC installed)
- Uses the same Fast Ethernet controller as all other Cisco 2600/3600 Fast Ethernet ports
- WICs are not hot swappable. The network modules support hot swap in the Cisco 3660.
- Supports a maximum of two channel groups per VWIC
- Does not support ISDN PRI
- Does not support Fast EtherChannel Comments:
- No reliance on other network modules, WAN interface cards, voice interface cards, or advanced integration modules. Will only operate in 3600 series routers.
Certifications & Standards
- FCC Part 15 Class B - CISPR 22 Class B Regulatory Approvals:
- UL 1950