Cisco PA-SRP-OC12SML

DPT-OC12 Single-mode long-reach port adapter

Product Highlights
Family
Modules
Brand
Cisco
Availability
Contact Us for Availability


Twitter Reddit Facebook

Information

The Cisco PA-SRP-OC12SML is a Service Route Processor (SRP) module designed for use in Cisco 12000 Series routers. It provides high-performance routing and forwarding capabilities for OC-12 (Optical Carrier Level 12) networks. The module is used to handle the processing and forwarding of data packets within the router, ensuring efficient and reliable network communication.

Specifications

Memory
Not Applicable
Storage
Not Applicable
Protocols
Not Applicable
Product Name
DPT-OC12 Single-mode Long-reach Port Adapter
Product Type
Port Adapter
Compatibility
  • Cisco 7202
  • Cisco 7204
  • Cisco 7206VXR
  • Cisco 7200 series
  • Cisco 7200 VXR routers
  • Cisco uBR7246 router
Shipping Weight
2.68 lb
Distance Support
24.8 Mile Single-mode Fiber
Interfaces/Ports
2 x OC-12 WAN
Security Features
Not Applicable
Status Indicators
  • ENABLED
  • PASS-THROUGH
  • RX PKTS
  • RX CARRIER
  • ACTIVE
Connectivity Media
Single-mode Fiber OC-12
Data Transfer Rate
622Mbps OC-12
Interfaces Details
2 x SC Duplex Connector OC-12 WAN
Shipping Dimensions
3 Height x 10.5 Width x 16.25 Depth
System Requirements
  • Slots: Cisco 7206VXR: 3, 4Cisco 7200 series: 1, 3, or 5Cisco 7200 VXR routers: 1, 3, or 5Cisco uBR7246 router: 1Cisco 7202 and Cisco 7204 can be installed in any two horizontally aligned port adapter slots
  • Cisco 7206VXR: 3, 4
  • Cisco 7200 series: 1, 3, or 5
  • Cisco 7200 VXR routers: 1, 3, or 5
  • Cisco uBR7246 router: 1
  • Cisco 7202 and Cisco 7204 can be installed in any two horizontally aligned port adapter slots
Additional Information
  • Accommodates large-scale network topology
  • Leverages fiber-optic capacity at OC-12c line rates
  • Controls the rate at which new packets are inserted on the media
  • Allows data to obtain fair-shared access to the OC-12c rings
  • Implements protection mechanisms, including wrap and unwrap in the event of fiber or node failure
  • Supports access to the SONET DCC channel
  • Power Budget and Signal Requirements: Power Budget: 25dBTransmit Power: -3 to 2 dBm at 1270 to 1380 nmReceive Power: -28 to -8 dBm
  • Power Budget: 25dB
  • Transmit Power: -3 to 2 dBm at 1270 to 1380 nm
  • Receive Power: -28 to -8 dBm
Products Account 0$0.00
Top
1