Information
The Cisco NM-HDV-2E1-60 is a network module designed for Cisco 2600, 3600, and 3700 series routers. It provides voice and data integration capabilities by supporting up to 60 channels of voice and data traffic over two E1 (European standard) or T1 (North American standard) interfaces. This module allows for the integration of traditional telephony systems with IP-based networks, enabling voice over IP (VoIP) services. It supports various voice compression algorithms and features, such as echo cancellation and voice activity detection, to ensure high-quality voice transmission.
Specifications
Protocols
- VoATM
- VoFR
- VoIP
Scalability
- Scales to meet Enterprise office requirements from small offices to large corporations
- Interoperable with Cisco multiservice voice and data products (such as 1750, MC3810, 2600, 3600, 7200, 7500, 5300, 5800, Cisco IP Phones, IP-PBX and Catalyst Switches)
- The packet voice trunk network module is shared across Cisco's entire line of modular access routers giving a scalable voice solution for branch, regional, and headquarter offices with six to 360 voice channels in a single box solution
- Provides Enterprises and managed service providers the ability to scale to any size campus using Cisco gateways
- Increases voice capacity without requiring the replacement of existing Cisco 3600 and 2600 Series routers
- Enables the administration of large dial plans via H.323 v2/v1 gateway and gatekeeper interoperability and support
Product Name
Network Module
Product Type
Network Module
Compatibility
- 3745 - 12.2(8)T
- 3725 - 12.2(8)T
- 3660 series - 12.0(7)XK
- 3640 - 12.0(7)XK
- 3620 - 12.0(7)XK
- 2691 - 12.2(8)T1
- 2650 - 12.1(3)T
- 2600XM Series - 12.2(8)T1
- 2600 series - 12.0(7)XK
- 1720 - Not Available
- 1600 series - Not Available
Shipping Weight
3.05 lb
Interfaces/Ports
2 x E1 WAN
Status Indicators
- Data carrier detect (CD)
- Loopback (LP)
- Alarm (AL)
- Voice DSP processing status
Data Transfer Rate
2.048Mbps E1
Interfaces Details
- 60 x Channel E1
- 2 x RJ-48 Connector
Shipping Dimensions
3 Height x 10.25 Width x 15.5 Depth
Humidity (Operating)
5% to 85% Non-condensing Relative Humidity
Temperature (Storage)
-13 degrees F (-25.0 degrees C) to 158 degrees F (70.0 degrees C)
Additional Information
- Voice & Fax Integration
- VPN & Firewall Solutions Flexibility:
- Programmable digital signal processors can support G.711, G.723, G.726, G.728, G.729 and G.729a/b for customized solutions to meet the need for high voice quality and bandwidth efficiency
- Packet Voice Digital Signal Processor Modules (PVDM-12=), provide the ability to increase the voice processing capabilities within this single network module
- Single or dual connections to PBXs, PSTNs or both using E1 or T1 interfaces via either a single or dual port E1 or T1 MultiFlex Voice/WAN interface card (VWIC) with integrated T1 CSU/DSU or E1 DSU
- Modular voice processing on the packet voice trunk Network Module, the Cisco 2600 and 3600 provide the power to support additional office requirements such as routing, dial concentration, firewall and VPN
- Clock Support: Pull-in range +/-64 PPM, Pass-through +/-32 PPM
- Maximum Simultaneous Call Setup: 60 Calls per Network Module
- Line Code: HDB3
- AMI Ones Density: Enforced for N x 56kbps channels
- Framing Format: D4 (SF) and ESF
- Output level (LBO): 0, -7.5, or -15 dB
- Input Level: +1dB0 down to -24 dB0
- Line Frequency: 2.048 Mbps +/- 75 bps/32PPM
- DTE/DCE Interface (VIC mode): G.704/structured DSU/CSU:
- Selectable DSX-1 cable length in increments from 0 to 655 feet in DSU mode
- Selectable DS1 CSU line build-out: 0, -7.5, -15, and -22.5 dB
- Selectable DS1 CSU receiver gain: 26 or 36 dB Dual-port, 60 channel E1 voice/fax network module:
- Supports 60 channels of medium complexity VoCoders: G.729a/b, G.726, G.711, and fax or 30 channels of G.726, G.729, G.723.1, G.728, G.729a/b, G.711, and fax
- Contains an integrated add/drop multiplexer
Temperature (Operating)
32 degrees F (0.0 degrees C) to 104 degrees F (40.0 degrees C)
Humidity (Non-operating)
5% to 95% Non-condensing Relative Humidity
Network Management Support
- SNMP protocol compliant
- Manageable via a MIB browser
- CiscoView interface for configuration
- ConfigMaker
- Cisco Voice Manager (CVM) supported, version 2.0
- NetSys supported Digital T1/E1 Packet Voice Trunk Network Module Management:
- Telnet / Console: - Remote and local configuration, monitoring, and troubleshooting from Cisco IOS CLI
- SNMP: - Router and DSU/CSU managed by single SNMP agent - Router/DSU/CSU appear as single network entity to user standard MIB (MIB II) - Cisco integrated DSU/CSU MIB - RFC 1406 T1 MIB, including alarm detection and reporting
- SNMP Traps: - Generated in response to alarms