Information
This mixed-media network module has two Ethernet ports and two user-configurable WAN Interface Card (WIC) expansion slots. One Ethernet connection is via an Ethernet AUI DB-15 connector or 10BaseT RJ-45 connector. The second Ethernet connection is via an RJ-45 connector. The supported WICs include the 1-port serial (WIC-1T), 1-port ISDN BRI with ST and U interfaces (WIC-1B-S/T, WIC-1B-U), 1-port 56 kbps DSU/CSU (WIC-1DSU-56K4), and 1-port T1/FT1 DSU/CSU (WIC-1DSU-T1).
Specifications
Protocols
VoIP
Product Name
Network Module
Product Type
Network Module
Compatibility
- 3745 - Not Available
- 3725 - Not Available
- 3660 series - 12.0(5)T
- 3640 - 11.1(7)AA
- 3620 - 11.1(7)AA
- 2691 - Not Available
- 2650 - Not Available
- 2600XM Series - Not Available
- 2600 series - Not Available
- 1720 - Not Available
- 1600 series - Not Available Not supported:
- VWIC-2MFT-T1
Expansion Slots
2 x WAN Interface Card (WIC)
Application/Usage
Data Networking
Connectivity Media
Twisted Pair 10Base-T
Data Transfer Rate
10 Mbps Ethernet
Interfaces Details
- 1 x DB-15/RJ-45 10Base-T (AUI) Auto-sensing LAN
- 1 x RJ-45 10Base-T LAN
Additional Information
- LAN-to-LAN Routing
- DSL Access
- Dialup Remote Access
- ISDN Concentration
- Serial & Legacy Concentration
- Voice & Fax Integration
- Ethernet 0 has both 10 Base-T and AUI connectors
- The VWIC-2MFT-T1-DI is supported, but with one serial channel group
- Supports half-duplex in all Cisco IOS versions
- Supports full-duplex beginning with Cisco IOS version 12.0(4)T
- WIC cards are not hot-swappable, but no hardware damage will occur if they are hot-swapped Physical Limitation of Serial Modules per Chassis:
- Cisco 3660: 6
- Cisco 3640: 4
- Cisco 3620: 2 Comments:
- No reliance on other network modules, WAN interface cards, voice interface cards, or advanced integration modules