Cisco AIM-ATM-4E1

4 port ATM IMA bundle

Product Highlights
Family
Modules
Brand
Cisco
Availability
Usually Ships within 2-3 Days
What's Included
Mounting Kit


Twitter Reddit Facebook

Information

The AIM-ATM optimizes the Cisco 2600, 2600XM, 2691, 3660, and Cisco 3700 Series modular multiservice routers by offering ATM adaptation layer 2 (AAL2) and ATM adaptation layer 5 (AAL5) support for low-density T1/E1 data and voice connections over ATM networks. This AIM module allows service providers and enterprise customers to take advantage of the reliability and quality of service (QoS) available with ATM connectivity. This AIM module provides a cost-effective option for reducing recurring cost and maximizing the benefits of the advanced bandwidth management features of the Cisco IOS software. This AIM module take advantage of the internal AIM slot(s) of the Cisco 2600, 2600XM, 2691, 3660, and 3700 series routers, ensuring that external slots remain available for components such as WAN interface network modules, and serial WAN network modules. By supporting CPU-intensive applications such as ATM or voice services on a dedicated coprocessor, users can obtain significantly higher throughput rates and enable new services and applications.

Specifications

Humidity
10% to 85% Non-condensing Relative Humidity Operating
Protocols
  • ATM
  • RSVP
  • MpoA
  • PPPoA
  • NHRP
  • VoIP
  • VoATM
Temperature
  • 32°F (0°C) to 104°F (40°C) Operating
  • -4°F (-20°C) to 149°F (65°C) Non-operating
Product Name
High Performance ATM Advanced Integration Module
Product Type
Advanced Integration Module
Application/Usage
Voice
Additional Information
  • ATM Edge Connectivity
  • It requires VWIC-1MFT-T1, VWIC-1MFT-E1, VWIC-2MFT-T1, or VWIC-2MFT-E1 Voice/Wan Inetrface Card
  • All voice interface cards are supported: FXS, FXO, Analog-DID, E&M, and BRI
  • Supports up to four ATM T1/E1 ports per AIM, using two 2-port multiflex T1/E1 VWICs in WIC slots, NM-xFE2W, NM-2W, or NM-HDV
  • ATM class of service (CoS) features CBR, VBR-nrt, VBR-rt, ABR, and UBR
  • AAL5: H.323 VoIP, up to four T1/E1 channels of AAL5 (with IMA support)
  • VoATM-AAL2 (trunked only)
  • If used in conjunction with a T1/E1 multiflex trunk voice/WAN interface card (VWIC-MFT) for circuit-mode data and frame-mode data over ATM infrastructures
  • Supports QoS features
  • Permanent virtual circuit (PVC) and switched virtual circuits (SVC) support, where SVC is for data only
  • ATM Forum UNI 3.0, UNI 3.1, and UNI 4.0
  • LAN Emulation 2.0 Client and Server
  • Per VC queuing for segmentation
  • Support for up to 1024 AAL5 VCs for data/voice features
  • Support for up to1024 AAL2 VCs with up to 255 subchannels each for voice per AIM
  • 1-Kbps resolution for sustained cell rate (SCR) and peak cell rate (PCR)
  • 32-Kbps minimum traffic rate
  • 13-bit range for VPI/VCI per interface
  • Maximum Burst Size (MBS) is up to 255 cells per VC
  • Dynamic management of the cell scheduler table
  • Operations and management (OAM) support (F5)
  • Early Packet Discard
  • AAL5 reassembly time-outs
  • AAL2 subcell multiplexing support
Certifications & Standards
  • H.323
  • RFC 1483 support for multiple encapsulations over ATM
  • RFC 1577 support for routing over ATM
  • AAL2
  • AAL5
  • UNI 3.0
  • UNI 3.1
  • UNI 4.0
Products Account 0$0.00
Top
1