Cisco 4OC48E/POS-SR-SC

Edge 4 Port OC-48c/STM-16c SONET/SDH SR with SC

Product Highlights
Family
Routers
Brand
Cisco
Availability
Usually Ships within 3-4 Days


Twitter Reddit Facebook

Information

The Cisco 4OC48E/POS-SR-SC is a line card module for Cisco routers. It is designed to provide high-speed optical connectivity for data transmission over long distances. The "4OC48E" refers to the four optical carrier 48 (OC48) interfaces, which support a data rate of 2.5 Gbps each. The "POS" stands for Packet over SONET/SDH, indicating that the module uses the POS protocol for encapsulating packets over the SONET/SDH network. The "SR" stands for short reach, indicating that it is designed for short-distance transmission. Finally, the "SC" refers to the type of optical connector used for the interface. Overall, the Cisco 4OC48E/POS-SR-SC is a high-performance line card module for high-speed optical networking.

Specifications

Weight
Not specified
Dimensions
Not specified
Packet Size
Up to 9180 bytes
VLAN Support
Yes
Hot Swappable
Yes
Interface Type
Packet over SONET/SDH (POS)
Power Consumption
Not specified
Optical Wavelength
1310 nm
SFP Connector Type
SC
Full Duplex Support
Yes
Optical Power Range
-7 dBm to -14 dBm
Flow Control Support
Yes
Payload Encapsulation
PPP, HDLC
MAC Address Table Size
Up to 16,000 entries
Optical Interface Type
Single-mode
Packet Forwarding Method
Store-and-Forward
Short Reach (SR) Support
Yes
Jitter Monitoring Support
Yes
Maximum Data Transfer Rate
OC-48 (2.488 Gbps)
Payload Scrambling Support
Yes
Optical Monitoring (OM) Support
Yes
Path Trace Message (PTM) Support
Yes
Quality of Service (QoS) Support
Yes
Alarm Indication Signal (AIS) Support
Yes
Link Loss Carry Forward (LLCF) Support
Yes
Remote Defect Indication (RDI) Support
Yes
Error Monitoring (ES, SES, UAS) Support
Yes
Digital Optical Monitoring (DOM) Support
Yes
Small Form-Factor Pluggable (SFP) Support
Yes
Receive Signal Strength Indicator (RSSI) Support
Yes

You may also like...

Products Account 0$0.00
Top
1